Taylor 814ce 2005年秋季限量Cocobolo
Cocobolo背侧,Curly Maple镶边,
乌木旋钮....真心漂亮...看着就舒心啊
先烧了把马丁,型号不高端,但是it sings to me...所以买琴和找老婆一样,适合自己就好。
有了马丁就琢磨着弄把泰勒吧...有比较才有成就感,这下暂时圆满了
生命不息,折腾不止
[ 本帖最后由 MaxMeng 于 2012-8-7 21:17 编辑 ] 是琴国那把么? 拍的真漂亮~ 真心喜欢这把泰勒 楼主毫无疑问是有大米的人呐!羡慕羡慕! 这是赤裸裸的引诱 米人啊。口水流 牛逼的琴啊 谁能告诉我为什么泰勒不用一根琴颈么? 查了一下网上的资料:英文原文见下,翻译大意是:
很多人误以为用整块木材切割的琴头和琴颈比拼接的好,其实这个是错误的认识...
原因是整块木材切割的时候,会按照木材纹理走向切割,由于琴头受到拉力会顺延着木材纹理直达下部,造成在琴颈与琴头过渡部位出现“弱点”
反之,用现代方式拼接的琴头和琴颈会更加牢固。
通常木吉他会使用scarf joint 和 finger joint两种拼接方式,理论上finger joint由于粘合接触面大于scarf joint, 因此会更加牢固。
scarf joint
finger joint
我这款琴头和琴颈部位的连接方式就是finger joint.
原文地址:
http://www.acousticmasters.com/AcousticMasters_Headstock.htm
Jointed headstocks versus solid necks
Guitar necks are either ‘solid’ necks carved from a single block of wood, or they may be built up from several pieces of wood. It's a common misconception that earlier guitars and today’s top of the range guitars, all use solid necks and that this somehow a superior method of construction. This is not the case, since most of the earliest guitars had headstocks made from a separate piece of wood, glued onto the neck. Although carving an entire neck from a solid blank may result in a neck that looks better, it leaves an inherent weakness in the headstock area. This is because the wood blank will be cut with the grain, so the neck itself will have the wood fibres running in parallel along its length, resulting in the strongest possible neck. However, because the headstock angles back from the neck, when the headstock is carved from the same block, the grain runs at an angle across the thickness of the headstock, so there’s a weakness at this point. With a glued headstock cut from a separate piece of parallel grain timber, the wood is once again being used in its strongest fashion. Contrary to what is often thought, a properly constructed glued joint, particularly when made with modern glues, is stronger than the wood around it and of course it makes more economical use of the raw timber. So a multi-part glued neck is in fact superior to a ‘solid’ neck in every respect, except possibly cosmetically.
[ 本帖最后由 MaxMeng 于 2012-8-8 17:55 编辑 ] 真好看,背侧。 网上查了点资料,来说说这把琴背侧使用的木材:(非专业研究,有错误之处欢迎指正)
中文:中美洲黄檀
英文:Cocobolo
拉丁文:Dalbergiagranadillo Pittier
这种木材主产于墨西哥等中美洲地区,商品名为cocobolo,生长轮明显,心材新切面暗红褐、桔红褐至深红褐,常带黑色条纹。Taylor主要运用这种木材在其高端的PS系列(Presentation Series)以及限量版吉他上,可见这种木材的地位。
另外,马丁的2012 John Mayer款也是用的cocobolo。
Cocobolo是一种高密度的热带木种,有着相对明亮的声音,从木材的音质角度来看,有点类似KOA,但低频更为下潜一些,而比玫瑰木则稍微明亮一些,其实coco也是玫瑰木的一种,并且是玫瑰木中密度最大,硬度最高的,这种墨西哥品种的木头有着很诡异的颜色,声音则十分丰满完美同样拥有美妙而丰富的泛音,共鸣十足的低音,和很充沛的音量。
cocobolo一般用于小的特制品,如刀把、枪把、国际象棋,高端笔杆等。
[ 本帖最后由 MaxMeng 于 2012-8-9 13:55 编辑 ] 方便大家浏览,可以麻烦版主将上面11楼和13楼的内容整到1楼去吗?
或者开个权限给我,偶自己来弄...
谢谢啦
[ 本帖最后由 MaxMeng 于 2012-8-9 14:26 编辑 ] Taylor 就是好看,口水啊 美啊啊啊。。看得我都硬了。。。 怎么不考虑Taylor 814CE 30TH Anniversary。。。 原帖由 潜行的影子 于 2012-8-10 16:58 发表
怎么不考虑Taylor 814CE 30TH Anniversary。。。
哪里有在卖?和coco比它的特点呢? 话说T的琴头看上去就像一公子哥
M的琴头就一平民
各有特色
回复 1楼 MaxMeng 的帖子
很不错顶顶顶 太漂亮了,只能仰望…… 攒钱!!!很喜欢!! 个人装备升级,这把琴目前正在二手区秒价出售有意的朋友赶快了
http://bbs.guitarschina.com/thread-1472349-1-3.html
[ 本帖最后由 MaxMeng 于 2012-10-27 20:51 编辑 ] 真TMD漂亮,,,顶起..
914和814我更喜欢814
taylor 我最喜欢的是 k26ce ,那琴声音太迷人了
页:
[1]