琴体连接处红线区的圆盘以及圆盘的凹槽有什么用？
大家帮看下，芬达琴体连接处红线区的圆盘以及圆盘的凹槽有什么用？ 琴颈仰角调节，通过调节里面一个螺丝可以调节琴颈的仰角。部分Fender琴有这个装置 http://www.seymourduncan.com/blog/the-tone-garage/adjusting-your-action-shimming-and-micro-tilt/Adjusting Your Action: Shimming and Micro Tilt
调颈的仰角
There are many different factors that go into the playability of a guitar, including the string height, the quality of the frets, the smoothness of the fretboard edges, the shape of the neck – the list goes on and on. One often-overlooked aspect for bolt-on guitars is the neck angle; get it wrong and you can run into difficulties in maintaining consistent action. Get it right and the guitar becomes a slick, playable machine. Let’s look at some common problems and how to fix them.
Neck Angle Too Shallow
If the neck angle is very shallow, you have the problem of the bridge or saddles not being able to go ‘low’ enough, which of course means you can’t get consistently low action should you want it. If the saddles go as low as possible and the action at the 22nd fret is still way too high, you have to increase the neck angle. There are a few different ways to address this. Dr_R 发表于 2015-7-19 12:03
琴颈仰角调节，通过调节里面一个螺丝可以调节琴颈的仰角。部分Fender琴有这个装置 ...
看见了，螺丝下方有个很小的六角螺口，谢谢解答！ Hendrix-HK 发表于 2015-7-19 12:06
http://www.seymourduncan.com/blog/the-tone-garage/adjusting-your-action-shimming-and-micro-tilt/
Ad ...
谢谢！内容很详细 调节仰角基本很少很少用，四个螺丝拉紧琴颈与琴体接触式一般公认的道理。 调了以后，需要把琴桥也升高，麻烦不说，共振变小了不说，走音也便频繁了，fender的这个设计根本就是渣，还不如把琴体连接处的木头直接做成13度的坡度来的实在
页:
[1]