1978年出產 Gibson G3 Bass 送hard case
本帖最后由 janixe 于 2017-6-15 17:03 编辑https://scontent.fhkg4-1.fna.fbcdn.net/v/t1.0-0/p320x320/11903960_10204811189858272_697178254774321579_n.jpg?oh=b54cfca7617d96365ce3ec7546930468&oe=59D75080https://scontent.fhkg4-1.fna.fbcdn.net/v/t1.0-0/p320x320/11028348_10204811189978275_3796651333348572535_n.jpg?oh=dff828501414a0ee45bfe38ef8e7c877&oe=59E68CCDhttps://scontent.fhkg4-1.fna.fbcdn.net/v/t1.0-0/p320x320/11903987_10204811189898273_5355762637235608870_n.jpg?oh=8c560196289e2a1ef0746fe0765ada75&oe=599D5252https://scontent.fhkg4-1.fna.fbcdn.net/v/t1.0-0/p320x320/11903722_10204811189938274_563085334908726125_n.jpg?oh=d886c17069aa2b88bf35e3f749423018&oe=59DC244B
https://scontent.fhkg4-1.fna.fbcdn.net/v/t1.0-9/11855825_10204811404743644_7147215353797619507_n.jpg?oh=d7e828378391b081f0c604caf31208a5&oe=599E56FE
G3 Controls
[*]Forward position activates the front and middle pickups in humbucking configuration.
[*]The back position activates the middle and back pickup in the same manner.
[*]The middle position activates all three pickups for what we have coined a "buck-and-a-half".
The G-3 was based on the Grabber, the main difference being the pickup configuration. The G3 features three single coil pickups wired in humbucking configuration, whilst the Grabber, had one 'sliding' humbucker. Both were the product of guitar designer Bill Lawrence who joined Gibson in the early 1970s. and produced a number of similar guitar models at the same time, such as the Marauder, L-6S and S-1.
Woods and ConstructionThe G-3 and Grabber both had bolt-on maple necks, and maple or alder bodies. Fingerboards were typically maple, though occasionally rosewood or ebony. All this maple, added to the bolt-on construction leads to a very bright sounding bass; plenty of snap.The lightweight Grabber bridge was not designed to hold strings, rather they are passed through the body and then over the bridge, and so improving sustain. Extra-long scale strings are therefore required.
页:
[1]