EBS混响内部2个开关什么作用啊
请教EBS混响内部2个开关什么作用啊？你把整个电路板拍看看说不定还能猜一下，只看开关还真不知道。 The EBS DynaVerb can be set to parallel
mode, which makes it suitable for
connecting to mixing consoles and so using
the unit just as if it was a rack effects unit.
To do so, carefully remove the four bottom
screws, take off the bottom cover and
change the two small switches to ”OFF”.
This will kill the direct signal from the reverb.
Since no direct signal is present in parallel
mode , it is good practice to turn up the
Reverb and Tone knobs to maximum setting
to start with. Note also that when the pedal
is bypassed, no signal is present at the
outputs 活吃1个寒国人 发表于 2019-3-11 08:46
The EBS DynaVerb can be set to parallel
mode, which makes it suitable for
connecting to mixing conso ...
有点不是太明白
页:
[1]