求助，北京哪位大侠会给marshall plexi 系列加装master钮？

穿破面纱 · 发表于 2014-4-3 21:56:35

求北京对于改marshall plexi改装比较在行的师傅，加装音量扭，维修音箱较专业的师傅，感激不尽。

穿破面纱 · 发表于 2014-4-4 00:38:54

找到图纸了这个对于懂电路的师傅就是小菜一碟吧！

[ 本帖最后由穿破面纱于 2014-4-4 00:41 编辑 ]

穿破面纱 · 发表于 2014-4-4 00:40:35

Master Volume Installation Instructions
Parts required:
250KA Dual Potentiometer x 1
2.2M Resistor x 2
Dual conductor shielded wire x approximately 2FT
Step 1: Remove the (2) 220K resistors that are connected to G1 & G2 on
layout diagram.
Step 2: Unscrew board from stand-off's. Gently lift board and cut off the
wires that are connected to G1 & G2.
Step 3: Unsolder these wires from pin 5 on each power tube socket.
Step 4: Remove the speaker jack that is furthest from the impedance
selector switch, and install the Dual 250KA potentiometer.
Step 5: Connect the Master Volume control as shown on the modified
layout diagram.

穿破面纱 · 发表于 2014-4-4 01:11:54

		自动登录	找回密码
密码			注册