|
楼主 |
发表于 2018-7-12 03:04:44
|
显示全部楼层
以下是PRS官网对于吉他保养的说明:
Care and Maintenance
To prolong the life of the finish of your new PRS instrument, we highly recommend that after each use the entire instrument, including the strings, be wiped thoroughly with a soft, clean, dry cloth. We recommend PRS Guitar Cleaner and/or PRS Guitar Polish for all PRS guitars with our normal acrylic or V12 finish. However, because the PRS Guitar Polish is NOT safe for Nitro finish, a quality furniture polish can be used to polish your Satin or Nitro finished PRS guitar.
Please note, if your guitar is uses nitro finish, we strongly recommend not hanging or setting the guitar in a guitar stand/hanger outfitted with chemically active synthetic/surgical tubing. Doing this may cause a chemical reaction with the nitrocellulose finish on the neck (ex: CE, Swamp Ash) or the body (ex: Modern Eagle, DGT, Sunburst Series), which could cause the finish to dissolve. Nitro is also prone to chemically react to exposure to leather straps and other synthetic materials. Do not store your nitro-finished guitar with your leather strap attached as this could cause the finish to dissolve. This damage will not be covered under the PRS Limited Lifetime Warranty.
For the cleaning and conditioning of a rosewood fretboard or a solid rosewood neck, we recommend the use of PRS Fretboard Conditioner. This will also clean tarnished frets as well as dirt built up on your fretboard if used with a toothbrush. After the conditioner is applied, thoroughly wipe down all of the surfaces with a soft, clean, dry cloth and seal it with a quality furniture polish. The natural oils in your hands, over time, should seal and treat the rosewood as well. Do not oil the headstock of your rosewood neck, as it may cause the headstock logo to lift.
Dirty, corroded or worn strings will cause loss of sustain and treble frequencies and may result in faulty intonation and tuning instability. Fresh strings will not only improve the overall tone of the instrument, but it will also make the instrument more enjoyable to play.
We use a nickel/silver combination to plate our hardware. While this plating does not wear as well as chrome plating, the tonal qualities of nickel/silver are far superior. We have found that Blue Magic Liquid Metal Polish works very well in removing tarnish from our nickel hardware. Other mag wheel polishes also work well. These products can be found at most auto parts stores.
Please remember that your PRS instrument is temperature and humidity sensitive. Do not expose your new PRS instrument to extreme temperatures or humidity as it could be damaging to the instrument. We have found the optimal temperature to be between 70 and 74°F with a humidity level between 40%- 45%. If the instrument is overexposed to sunlight, the stain color may fade.
All PRS maintenance accessories, including PRS Guitar Polish, Cleaner, and cloths, are available through your authorized PRS dealer or international distributor. They are also available in the U.S. through our Accessory Shop at 410-643-9970 or online at http://prsaccessories.com/. |
|