musescore不能演奏

chengdull

musescore现在不能演奏（以前可以）。重装了还是不行，请问谁知道原因啊。先谢谢了。

chengdull

截图咋粘不上呢

chengdull

新手问题多，请多多包涵

JiangYing

有可能是设置问题，试试：

Preferences --> I/O --> Device: Built-In Output

chengdull

谢谢版主热心解答。
可是我的设置选项里面没有你说的内容。

chengdull

播放器始终没有启动

JiangYing

chengdull 发表于 2019-8-25 01:24
谢谢版主热心解答。
可是我的设置选项里面没有你说的内容。

I/O = 输入／输出

plussa

JiangYing 发表于 2019-8-25 22:24
I/O = 输入／输出

我高度怀疑姜版是来吉他圈卧底的挨踢男

JiangYing

plussa 发表于 2019-8-25 10:03
我高度怀疑姜版是来吉他圈卧底的挨踢男

又要打俺？

chengdull

这里的设备不可调整

JiangYing

chengdull 发表于 2019-8-26 01:27
这里的设备不可调整

看来问题就在这里，我的是这样：



要不您试试如下步骤：

1. 卸载软件
2. 如果用PC，清理Windows Registry里面的有关项目
3. 重启电脑
4. 下载最新版本的软件重新安装

chengdull

我就是卸载后直接在官网下载安装的。看来没办法了
无论如何，谢谢版主的热心解答。

JiangYing

chengdull 发表于 2019-8-28 01:29
我就是卸载后直接在官网下载安装的。看来没办法了
无论如何，谢谢版主的热心解答。 ...

不用客气，在网上找到了这个网页，您试试那些步骤：

https://musescore.org/en/node/96811

原文：

How to restore sound if playback stops working

Occasionally, when something about MuseScore's installation is changed, playback may stop working. This How-To describes how to get playback working again.

• First, to verify the problem, go to the View menu and choose Synthesizer. By default (and as of MuseScore 2.2), you should see "MuseScore_General.sf3" in the Fluid tab of the Synthesizer window.
• If it's not there, or if View→Synthesizer is actually disabled, one option is to restore MuseScore's factory settings. This will reset everything, not only the missing SoundFont.
• Alternatively, esp. if View→Synthesizer shows you there is no SoundFont loaded, you can avoid reverting to factory settings by simply downloading and installing a replacement SoundFont. Make sure to apply the "Set as Default" button in the Synthesizer after loading the replacement SoundFont.
• Check Edit→Preferences→I/O (MuseScore→Preferences→I/O on the Mac). If that is empty, try to update your sound drivers. Esp. if you're on a 64-bit Windows and MuseScore 2 has sound, but MuseScore 3 does not, the cause might be 32-bit sound drivers. You coud in that case also try a 32-bit MuseScore version.
• In the "Preferences" dialog under the I/O tab is a button that says "Restart Audio and MIDI Devices" Clicking this button often fixes audio not playing.
• On windows, right click the speaker icon, select "Open volume mixer" and ensure that your MuseScore version is listed there (you may need to scroll left or right) and that the volume is not muted.
• If you have a newer Mac with a touch-bar, you probably already know all too well that it is very easy to accidentally hit the "mute" touch-panel-button while reaching for any key in the upper-right corner of the keyboard. Always try that (touching it to see if it shows the muted icon or not, twice if it does) first!
  

Note: In case of interference with other programs, esp. on Windows, go into your soundcard configuration from Control Panel and ensure that the "Allow applications to take exclusive control of this device" in the Advanced tab of both Playback and Recording is unticked.

For some Mac users a PRAM (Parameter Random Access Memory)/NVRAM (NV for non-volatile) reset may solve it

chengdull

看样子有望解救，我马上试试。

chengdull

SoundFont根本没有，似乎要收费才行

JiangYing

实在不行就等新版本出来后再试试。

chengdull

实在需要的时候花钱购买吧。

chengdull

实在需要的时候花钱购买好了。