|
|
去年年底买的RP500，回来发现DIGITECH官网上可以升级增加了一个20秒的录音功能。也一直没咋摸过效果器，最近发现效果器经常自动切换音色。比较头大。有的时候就没声了。是不是我升级的步骤有误？那位大哥能给我讲解一下啊。十分感谢感谢十分！
Step 4: Run NetUpdater
Updating your firmware requires the RP to perform a factory reset to complete. A factory reset will erase all user presets from memory. It is recommended that you backup all your presets using the X-Edit Editor/Librarian backup utility before starting the update procedure.
- Using the NetUpdater application requires being connected to the internet. If you are not connected, you should connect now.
- Apply power to your DigiTech USB device and then connect a USB cable from the DigiTech USB device to an available USB port on your computer.
- Launch the NetUpdater.exe application that was downloaded by double-clicking its icon.
- Follow the instructions outlined in the updater to update your product’s firmware.
- When the update has finished, close the NetUpdater application by clicking the Done button.
Once the updater has finished, a Factory Reset will automatically take place erasing all User presets. You will then need to calibrate your expression pedal as follows:
- When the Display prompts you with TOE DN, rock the Expression Pedal forward (toe down) and press the flashing 5 Reverb Footswitch.
- When the Display prompts you with TOE UP, rock the Expression Pedal back (toe up) and press the flashing 5 Reverb Footswitch.
- The Display now prompts you to calibrate the V-Switch sensitivity (VSWxxx), where XXX is the current V-Switch threshold. Rock the Expression Pedal forward and press firmly on the toe once to turn the V-Switch on (WAH ON), and again to turn the V-Switch off (WAHOFF).
- If the V-Switch is too sensitive, press the Up Footswitch to raise the threshold (range is 0-199). Keep testing the V-Switch sensitivity and adjust the threshold until it only engages when you want it to (too sensitive a setting will lead to the V-Switch falsely triggering on or off when using the Expression Pedal).
When the V-Switch sensitivity is set to your satisfaction, press the flashing 5 Reverb footswitch to exit. |
|
发表于 2010-1-17 16:55:12
