请教ROLAND BOSS RC3如何升级
请教ROLAND BOSS RC3如何升级我的版本是1.20的，现在的是1.40的，改进了一些bug，我按照它官方网站的方法，没有能升级成功，如今还是1.20，希望有识之士能教教我。
谢谢~~~~~~~~~~！
以下是英文版本的。
Procedure for the update
NOTE
* You must not do the following operations on restoring. Doing so might make your computer freeze, or might result in the loss of all of the RC-3's data.[*]Turn off the RC-3's power.[*]Disconnect the USB cable.[*]Allow your computer to enter suspend (standby) or hibernate mode, restart it, or shut it down.
[*]Connect an AC adaotor to your RC-3.
* The RC-3 will not operate on USB bus power.
[*]Set the [
OUTPUT LOOP
] knob and the [
OUTPUT RHYTHM
] knob to the " MIN " position.[*]Hold down the [
TAP TEMPO
] button and the [
WRITE
] button, and connect a plug to the OUTPUT A(MONO) jack. Then it will turn on and the display will indicate the "UP".[*]Use a commercially available USB cable to connect the RC-3's USB connector to your computer's USB connector.
When the RC-3 is recognized from your computer correctly, the display of the RC-3 will indicate "UP.".
[*]Open the "BOSS_RC-3" drive.
[ Windows users ]
Within My Computer (or Computer), open " BOSS_RC-3 " (or Removable Disk).
[ Mac OS users ]
On the desktop, open the " BOSS_RC-3 " icon.
[*]Copy (drag and drop) the "
RC-3ROM.BIN
" and the "
ROMINFO.TXT" in the " rc3_sys_v140 " folder into the root directory (the same hierarchy as the " ROLAND " folder) of the " BOSS_RC-3 " drive.[*]After the copy has been completed, unmount or remove the drive on your computer.
* Refer to the step four of the " Connecting to Your Computer via USB " section in the owner's manual.[*]Disconnect the USB cable from your computer.
The RC-3's display will indicate the "
U.P
" after the connection is disabled correctly.[*]Confirm the "
U.P
" message on the display and then push the [WRITE
] button.
The display will indicate the "__".[*]Push the [
WRITE
] button again to start the update process.
When it has completed, the display will indicate the "OK".[*]After you confirm the update completion with the "OK" indication, remove the plug from the OUTPUT A(MONO) jack. Then it will power off.
* The update program copied into the RC-3 will be removed automatically when the update has completed.[*]Please verify the version number "1.30" with the procedure described in "How to tell the version" part of this document. 难道就没有人知道，没有人升级么？ buf 用修改吗。我啥都感觉不出来 切换的时候有延迟~~~！所以roland做了升级。 可以联系下罗兰中国 感谢，感谢楼上的哥们~~！ 小天使loop 做到了这点 升级完事儿了就不延迟了！？！？我擦，那就牛逼了。 哇哈哈，跟楼主一样是1.20。感谢楼主的帖子，才知道有升级这个事儿。升级成功了，果然不延迟了。
ps：罗兰中国压根没有更新程序，鄙视一下。跑到日本网站才下载到的。 同樣rc user路過，連usb線都沒有的說。。。 你们说泥轰会不会用固件从USB口发起攻击？ 我也升级成功了 要感谢BOSS RC LOOP 中国交流群里的一位 大神帮助我省的级 还打算要卖掉rc3现在看来 还得玩一阵子
[ 本帖最后由 英国豌豆 于 2014-1-20 22:15 编辑 ]
回复 13楼 英国豌豆 的帖子
哥们 群号是多少啊？？？麻烦告诉下！！谢谢
页:
[1]