双琴颈strat style吉他的制作过程
转贴双琴颈strat style吉他的制作过程无意中发现了一个网站 还不错~转贴过来给大家欣赏一下~顺便翻译了一下 锻炼一下英文
http://www.randyciak.com/guitar/Step%201%20Wood%20Select%20and%20Layout.jpg
AAA flame Maple stock is selected for the
necks
琴颈材料选用是AAA级的火焰枫木
http://www.randyciak.com/guitar/Step%202%20Rough%20BandSaw.jpg
The Lower neck is rough cut from the raw stock on the band saw. Thecrew at Musikraft eat high grade
sawdust for lunch everyday :)
下边（双琴颈下边的那根）的琴颈是用曲线锯直接从木料上粗加工切出来的 。Musikraft的全体员工每天午饭都想用高等级的锯末（这句是废话）
http://www.randyciak.com/guitar/Step%203%20Showing%20Rough%20BandSaw.jpg
Rough Cut Complete!
粗加工完成
http://www.randyciak.com/guitar/Step%205%20CNC%20Outside%20Profile.jpg
Next the CNC Equipment cut the classic CBS Head-stock!Fat heads rock !!!
这一步就是CNC设备切出classic CBS 式的琴头（不知道什么是CBS...）
http://www.randyciak.com/guitar/Step%206%20CNC%20Truss%20Rod%20Slot.jpg
Next the truss-rod slot is cut!Were getting excited （废话）-
这一步 铣出调节杆的槽
http://www.randyciak.com/guitar/Step%207%20Truss%20Rod%20Install%20Different%20Shop.jpg
Truss rods are both installed.
these will be adjusted from
the heel - just like the
vintage CBS 60's strats!
两个调节杆都已经安装完毕 可以在根部调节他们 ---就像是vintage CBS 60's strats的neck
然后是粘指板和打磨 作者废话太多 不转了
http://www.randyciak.com/guitar/Step%208%20Shaper%20Jig%20FB%20Radius.jpg
http://www.randyciak.com/guitar/Step%209%20FB%20Radius.jpg
http://www.randyciak.com/guitar/Step%2010%20CNC%20Fret%20Slot.jpg
Fret Slots are cut (21 )
正在切品丝槽（21品）
http://www.randyciak.com/guitar/Step%2011%20Scoop%20HS.jpg
Headstock Scoop is formed 我估计是打磨出指板和琴头连接处的那个弧度
http://www.randyciak.com/guitar/Step%2011A%20Scoop%20Done.jpg
http://www.randyciak.com/guitar/Step%2012%20CNC%20Top%20Dots.jpg
Neck is drilled for dot inlays - Std.
black ones have been selected.
打标记点的孔
http://www.randyciak.com/guitar/Step%2013%20%20CNC%20Back%20Profile%20Fat%20Back.jpg
粗加工琴颈背面的弧度
http://www.randyciak.com/guitar/Step%2014%20Rough%20Carve%20Transition.jpg
细打磨...
http://www.randyciak.com/guitar/Step%2014A%20Rough%20Carve%20Transition%20Done.jpg
琴颈粗加工完成~
http://www.randyciak.com/guitar/CNC%20Top%20Cuts%20complete.jpg
While the necks were being finish sanded
the double strat body was CNC top routed!
琴颈粗加工的完成的同时 琴体也在CNC台上加工ing.....
http://www.randyciak.com/guitar/CNC%20Back%20Cuts%20Complete.jpg
http://www.randyciak.com/guitar/Corner%20Radius.jpg
http://www.randyciak.com/guitar/Finish%20Sanding.jpg
Finish Sanding of the
Double Strat Body
琴体打磨完工
http://www.randyciak.com/guitar/Side%20Dots.jpg
Side marker installation标记点安装完成
http://www.randyciak.com/guitar/Fret_Press_tn.jpg
6100 Frets are pressed in...
压品丝
http://www.randyciak.com/guitar/final_320_sanding.jpg
Final Sanding of the necks begin... 最后的打磨开始了
http://www.randyciak.com/guitar/db25.jpg
http://www.randyciak.com/guitar/db26.jpg
初步安装一下
http://www.randyciak.com/guitar/db27-5.jpg
http://www.randyciak.com/guitar/db28.jpg
品丝挖槽...手艺活阿 也是辛苦活
http://www.randyciak.com/guitar/db31.jpg
http://www.randyciak.com/guitar/db32.jpg
http://www.randyciak.com/guitar/db33.jpg
http://www.randyciak.com/guitar/db35.jpg
http://www.randyciak.com/guitar/db36.jpg
http://www.randyciak.com/guitar/db34.jpg
然后琴颈上漆...
http://www.randyciak.com/guitar/db37.jpg
http://www.randyciak.com/guitar/db38.jpg
http://www.randyciak.com/guitar/db39.jpg
琴颈logo制作以及最后打磨 上金属件
http://www.randyciak.com/guitar/db41.jpg
http://www.randyciak.com/guitar/db43.jpg
http://www.randyciak.com/guitar/db44.jpg
http://www.randyciak.com/guitar/db42.jpg
http://www.randyciak.com/guitar/db43.jpg
http://www.randyciak.com/guitar/db46_5.jpg
http://www.randyciak.com/guitar/db47.jpg
http://www.randyciak.com/guitar/db48.jpg
http://www.randyciak.com/guitar/db49.jpg
http://www.randyciak.com/guitar/db50.jpg
P.S. 很多朋友不知道这个logo是怎么做的 其实这种技术叫做水转印
琴体上漆
http://www.randyciak.com/guitar/db29.jpg
http://www.randyciak.com/guitar/db30.jpg
http://www.randyciak.com/guitar/db51.jpg
http://www.randyciak.com/guitar/db52.jpg
http://www.randyciak.com/guitar/db53.jpg
http://www.randyciak.com/guitar/db54.jpg
http://www.randyciak.com/guitar/db55_5.jpg
金属件 以及电子器件安装
http://www.randyciak.com/guitar/db56.jpg
http://www.randyciak.com/guitar/db57.jpg
http://www.randyciak.com/guitar/db58.jpg
http://www.randyciak.com/guitar/db59.jpg
http://www.randyciak.com/guitar/db60.jpg
http://www.randyciak.com/guitar/db61.jpg
http://www.randyciak.com/guitar/db62.jpg
http://www.randyciak.com/guitar/db63.jpg
http://www.randyciak.com/guitar/db64.jpg
http://www.randyciak.com/guitar/db65.jpg
下边的拾音器选用的是Dimarzio Hs-3 和YJM Pickups
最后的完成图
http://www.randyciak.com/guitar/db66.jpg
http://www.randyciak.com/guitar/db67.jpg
最后附琴的整体配置
Double Strat Body (Top/bottom guitar offset by 1.5 inches)
Two Scalloped AAA Flame Maple Lam boards necks / full 1" super fat back profile
Dunlop 6100 frets
Top neck reverse CBS
Vintage nickel tuners (Kluson Deluxe)
The lower strat will be a conventional CBS Strat style
Upper strat will be an electric nylon string utilizing piezo pickups & string through body
The lower strat willbe configured std Vintage Tremolo with Dimarzio Hs-3 and YJM Pickups! 附一个JOE的试琴视频（觉得比较搞笑 JOE这个不可一世的家伙 把英格威扁的一文不值 却过来给这琴录了一段视频 ）^6
http://www.randyciak.com/joestump.wmv
[ 本帖最后由 透明的狼 于 2006-11-1 13:42 编辑 ]
~~~
呵呵~~不错`~~~~那为兄弟了解那个压电琴桥的电路??[ 本帖最后由 why8687 于 2006-11-1 14:14 编辑 ] 好帖子
cbs是指fender被cbs收购那段时期生产的琴 原来这样啊 了解~~~
顺便把原贴地址贴出来 里边还有很多好东西
http://www.randyciak.com/guitar/ 帮顶噢........
正是我想要的
谢谢兄弟啦........... `````可惜没有图纸涅 。。。。。。。。。。。。。。。。。。
无语了。。。。。。。。。。。
为什么。。。。。。。。。。。。。。 dddddddddddddddddddddddddddddddd 这老外们也太有钱了，你说AAA级的火焰纹枫木还做琴颈？用来做琴体多帅啊！ 不错！真棒！
可有一事不明白（也许是纯业余问题）
上面的琴体怎么没有拾音器啊？ 原帖由 我爱diy 于 2006-11-7 17:25 发表
这老外们也太有钱了，你说AAA级的火焰纹枫木还做琴颈？用来做琴体多帅啊！
琴颈也很重要 用AAA级的不光是为了帅
[ 本帖最后由 透明的狼 于 2006-11-7 22:13 编辑 ] 原帖由 透明的狼 于 2006-11-7 22:12 发表
琴颈也很重要 用AAA级的不光是为了帅
哈哈的确，对于中国的行情，这么好的带纹理的枫木一般用来做琴体比较好！琴颈可以用aaa的没有纹理的枫木。如果是我肯定是这么做。不过，国内带纹理的枫木太难买了，能买到的无非是一层薄薄的贴面。 绝对精华！ ……强 精华！精华！ 原帖由 qioqiop 于 2006-11-7 22:09 发表 http://bbs.guitarschina.com/images/common/back.gif
不错！真棒！
可有一事不明白（也许是纯业余问题）
上面的琴体怎么没有拾音器啊？
尼龙弦，穿体式琴桥压电拾音器 原帖由 透明的狼 于 2006-11-1 13:37 发表
附一个JOE的试琴视频（觉得比较搞笑 JOE这个不可一世的家伙 把英格威扁的一文不值 却过来给这琴录了一段视频 ）^6
http://www.randyciak.com/joestump.wmv
joe 斯塔普 就是一个**
页:
[1]