The Lower neck is rough cut from the raw stock on the band saw. The crew at Musikraft eat high grade
sawdust for lunch everyday :)
下边（双琴颈下边的那根）的琴颈是用曲线锯直接从木料上粗加工切出来的 。Musikraft的全体员工每天午饭都想用高等级的锯末（这句是废话）
Rough Cut Complete!
粗加工完成
Next the CNC Equipment cut the classic CBS Head-stock!Fat heads rock !!!
这一步就是CNC设备切出classic CBS 式的琴头（不知道什么是CBS...）
Next the truss-rod slot is cut!Were getting excited （废话）-
这一步 铣出调节杆的槽
Truss rods are both installed.
these will be adjusted from
the heel - just like the
vintage CBS 60's strats!
两个调节杆都已经安装完毕 可以在根部调节他们 ---就像是vintage CBS 60's strats的neck
然后是粘指板和打磨 作者废话太多 不转了
Fret Slots are cut (21 )
正在切品丝槽（21品）
Headstock Scoop is formed 我估计是打磨出指板和琴头连接处的那个弧度
Neck is drilled for dot inlays - Std.
black ones have been selected.
打标记点的孔
粗加工琴颈背面的弧度
细打磨...
琴颈粗加工完成~
While the necks were being finish sanded
the double strat body was CNC top routed!
琴颈粗加工的完成的同时 琴体也在CNC台上加工ing.....
Finish Sanding of the
Double Strat Body
琴体打磨完工
Side marker installation标记点安装完成
6100 Frets are pressed in...
压品丝
Final Sanding of the necks begin... 最后的打磨开始了
初步安装一下
品丝挖槽...手艺活阿 也是辛苦活
然后琴颈上漆...
琴颈logo制作以及最后打磨 上金属件
P.S. 很多朋友不知道这个logo是怎么做的 其实这种技术叫做水转印
琴体上漆
金属件 以及电子器件安装
下边的拾音器选用的是Dimarzio Hs-3 和YJM Pickups
最后的完成图
最后附琴的整体配置
Double Strat Body (Top/bottom guitar offset by 1.5 inches)
Two Scalloped AAA Flame Maple Lam boards necks / full 1" super fat back profile
Dunlop 6100 frets
Top neck reverse CBS
Vintage nickel tuners (Kluson Deluxe)
The lower strat will be a conventional CBS Strat style
Upper strat will be an electric nylon string utilizing piezo pickups & string through body
The lower strat will be configured std Vintage Tremolo with Dimarzio Hs-3 and YJM Pickups!
发表于 2006-11-1 13:35:56
