顶级电吉他的制作

music_and_life 发表于 2009-2-18 14:45:58

GooglePRS的图片时候偶然看到了个叫Miller的人（不是投3分的那个）
惊呼大师转贴一起分享下杰出的电吉他是怎么做成的...
原文地址 http://www.guitaristjeffmiller.com/guitars13.htm

Gaudy Paul
Well, here's a double-cut that should be pretty exotic looking when it is finished.Ithas a AAAAA quilted carved top and a matching 1/4" AAAAA quilted maple back.The centersandwich of the body is wenge.The neck is flame maple and wenge.
The top and back maple plates came from the same billet, so they are pretty close toan exact mirror of each other.It'll have a Floyd and Sustainer but no Variax.I'mreally happy about that.I am absolutely burnt out on the variax right now.
After I plane and joint the top and back plates, they are glued.
http://www.guitaristjeffmiller.com/gaudy/gaudy01.JPG

That's one crazy looking neck.
http://www.guitaristjeffmiller.com/gaudy/gaudy1.JPG
http://www.guitaristjeffmiller.com/gaudy/gaudy2.JPG
http://www.guitaristjeffmiller.com/gaudy/gaudy3.JPG
After the plates have been glued.. The back plate is on the left, top on the right.
http://www.guitaristjeffmiller.com/gaudy/gaudy02.JPG
Same as always...I'm placing the neck where I want it to sit in the body.OnceI'm happy with the placement, I draw a line around it and rout it.
http://www.guitaristjeffmiller.com/gaudy/gaudy4.JPG
Back plate glued on.
http://www.guitaristjeffmiller.com/gaudy/gaudy5.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy6.jpg
The center is wenge.
http://www.guitaristjeffmiller.com/gaudy/gaudy7.jpg
Neck pocket routed.
http://www.guitaristjeffmiller.com/gaudy/gaudy8.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy9.jpg
This one gets the SSH pickup rout, so I have to cut the top plate in around the fretboard.I can't do a PRS type rout for the neck pickup.Gotta leave some maple betweenthe fretboard and neck pickup.
http://www.guitaristjeffmiller.com/gaudy/gaudy10.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy11.jpg
Got the top carve roughed in.
http://www.guitaristjeffmiller.com/gaudy/gaudy13.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy14.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy15.jpg
Pickup routs done.
http://www.guitaristjeffmiller.com/gaudy/gaudy16.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy18.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy20.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy21.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy22.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy23.jpg
Starting on the trem rout.
http://www.guitaristjeffmiller.com/gaudy/gaudy26.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy27.jpg
Quilted Maple headstock overlay glued on.
http://www.guitaristjeffmiller.com/gaudy/gaudy28.jpg
I decided to chamber the body out to lighten it up a bit.
http://www.guitaristjeffmiller.com/gaudy/gaudy29.jpg
A A little mock-up.She's looking better!
http://www.guitaristjeffmiller.com/gaudy/gaudy30.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy31.jpg\This is cool.Notice how the quilt pattern on the sides match from front to back.That's what I was after. The top and back came from the same billet.I tried to line them up sothe grain patterns matched.It turned out pretty well!
http://www.guitaristjeffmiller.com/gaudy/gaudy32.jpg
Got the rout done for the recessed floyd.
http://www.guitaristjeffmiller.com/gaudy/gaudy34.jpg
I threw a couple strings on to make sure everything lines up.
http://www.guitaristjeffmiller.com/gaudy/gaudy35.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy36.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy37.jpghttp://www.guitaristjeffmiller.com/gaudy/gaudy38.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy40.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy39.jpg
All holes drilled and 5-way cut.
http://www.guitaristjeffmiller.com/gaudy/gaudy41.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy42.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy43.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy44.jpg
Starting the stain job.I applied black first.
http://www.guitaristjeffmiller.com/gaudy/gaudy45.jpg
Sand most of the black back off.
http://www.guitaristjeffmiller.com/gaudy/gaudy46.jpg
Now apply the color of choice for this guitar.
http://www.guitaristjeffmiller.com/gaudy/gaudy47.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy48.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy49.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy52.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy53.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy54.jpg
All clear coats done.Starting the buffing.
http://www.guitaristjeffmiller.com/gaudy/gaudy55.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy56.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy57.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy58.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy59.jpg
All done.
http://www.guitaristjeffmiller.com/gaudy/gaudy60.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy61.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy62.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy63.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy64.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy65.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy66.jpg
http://www.guitaristjeffmiller.com/gaudy/gaudy67.jpg

[ 本帖最后由 music_and_life 于 2009-2-18 15:36 编辑 ]

67度 发表于 2009-2-18 15:04:09

修理工 发表于 2009-2-18 15:14:25

木材无敌了！！

music_and_life 发表于 2009-2-18 15:18:12

原帖由修理工于 2009-2-18 15:14 发表 http://bbs.guitarschina.com/images/common/back.gif
木材无敌了！！
嘿嘿是啊！
看到那个絮状云的木材就知道成品会美得无以伦比

你也加油啊！等着你的新琴的最终品！很关注呢！

其实贴出来也是想能让坛子里的DIY大师们能有交流和学习国外大师的机会
比如你～～～

俺呢... 奏是看看～～～一点不会干活
估计动手能力仅限于合理的换弦了哈哈～～

修理工 发表于 2009-2-18 15:30:26

我担心的不是做工，真正的好料不好找啊！！！！！不过我还是喜欢朴实点的东西。太漂亮的贴面价钱和声音不成比例不得不考虑性价比啊。

chenshisky 发表于 2009-2-18 15:30:49

我疯了，国内谁能给我做出来，我出一万元！

music_and_life 发表于 2009-2-18 15:31:31

原帖由修理工于 2009-2-18 15:30 发表 http://bbs.guitarschina.com/images/common/back.gif
我担心的不是做工，真正的好料不好找啊！！！！！不过我还是喜欢朴实点的东西。太漂亮的贴面价钱和声音不成比例不得不考虑性价比啊。
没错～～～
但我想以后一定会用到的！
加油！

soloartist 发表于 2009-2-18 15:36:38

不錯不錯。

瞻瞻发表于 2009-2-18 15:38:52

靠！真他妈漂亮！牛人！

guitarjl1357 发表于 2009-2-18 16:08:13

太牛啦，漂亮！

金属之子HIHI 发表于 2009-2-18 16:14:02

太漂亮了...

UTW 发表于 2009-2-18 17:39:02

扁桃体 发表于 2009-2-18 18:30:41

原帖由 UTW 于 2009-2-18 17:39 发表 http://bbs.guitarschina.com/images/common/back.gif

一万元
这把一万园不够，但是国产的这把1万足够了，看看这个国产的手工
http://kc.kuanchi7.com/pang-musicman.html/

metal_01 发表于 2009-2-18 19:18:30

太漂亮了.................

idiot333 发表于 2009-2-18 20:46:27

會否太多高頻???

郁闷的冰箱 发表于 2009-2-18 20:58:16

这琴都不舍得弹了。。。。。。。。。。。。

5477king 发表于 2009-2-18 22:52:20

看呆了！

漂亮得难以形容了！木纹、喷漆、配件…………真是无敌了！

the-yan 发表于 2009-2-18 23:37:40

太喜欢了

新爵士黑芬 发表于 2009-2-19 00:08:51

做的真是太漂亮了！

music_and_life 发表于 2009-2-19 10:48:42

处女贴感谢大家的回复

mzb911 发表于 2009-2-19 11:47:24

快去赚钱吧!!!要不就会:撑死眼睛饿死

UTW 发表于 2009-2-19 15:52:25

zikaqin 发表于 2009-2-19 16:21:30

看得我心里痒痒的~~~~~

锻刀为锤 发表于 2009-2-19 21:15:23

原帖由 chenshisky 于 2009-2-18 15:30 发表 http://bbs.guitarschina.com/images/common/back.gif
我疯了，国内谁能给我做出来，我出一万元！

一万？？？？？谁要是一万就敢接这样的活儿~~~~赔死了

虫子音乐 发表于 2009-2-20 17:03:34

可以说光镶钳那点活就值3000

niedu 发表于 2009-2-21 16:07:36

这个大师我经常看拉，绝对的牛逼。我早就是他的粉丝了。

ccjsb 发表于 2009-2-25 17:25:47

太强大了，小宇宙爆发般的华丽啊

透明的狼 发表于 2009-2-25 17:50:44

双弦锁？枕一个旋钮一个~~~

KK拖拉机 发表于 2009-2-25 18:19:24

这么多年过去了，弥勒大叔还是迷倒了一代又一代的吉他爱好者。。。。。。。。。

sunlei07 发表于 2009-2-25 18:37:43

首页留名

中年海象 发表于 2009-2-27 17:21:03

Deadsoul 发表于 2009-3-5 03:36:12

这琴的延音真他妈变态

zr1988415 发表于 2009-3-5 05:28:17

5477king 发表于 2009-3-5 23:38:12

额~~~~~~~~~~~

看呆了~~~~材料真是无与伦比啊！世间少有的，那个琴体料是火焰枫木吧？

66大顺 发表于 2009-3-6 02:58:57

blackbuddha 发表于 2009-3-6 09:58:27

疯啦！！！！！！！！！！！！！！！

qq350116542 发表于 2009-3-21 11:32:06

这吉他真利害，但只有图，我现在可没那本事去做哦！

ghostian 发表于 2009-3-24 20:00:39

踩踩..............................

ROANY 发表于 2009-4-17 01:12:34

谁收徒啊··

我不弹琴了

改学制造电吉他了！！！

不是冲动！！！是真想学学啊··

有老师收徒没啊？？？

ghostian 发表于 2009-4-17 02:26:35

理想标准...................

页: [1] 2 3

吉他中国论坛's Archiver