|
发表于 2012-5-25 10:58:06
|
显示全部楼层
Headphones
这是原文
Q: What size are the Headphone outputs on my Line 6 device?
A: The majority of the headphone jacks on Line 6 products are 1/4". The Floorpod series, Pocket POD, guitarport, and Toneport GX have a 3.5mm (1/8") headphone jack.
Q: What is the recommended headphone ohm rating for use with Line 6 products?
A: We recommend headphones rated between[/fly](pro or semi-pro level) studio headphones for best results. Results may vary between between headphone models and manufacturers.
Q: Can I use smaller earbud-style (i.e. Ipod) headphones with my Line 6 gear?
A: Earbud-style headphones (typically under 150 ohms) are not recommended. Some users of earbud-style headphones have experienced a "motorboat" sound in the headphones. Results may vary between between headphone models and manufacturers.
Q: I noticed that when I plug my headphones into my Line 6 amplifier there is no sound from the speaker. Is this intended?
A: Yes, inserting a plug into the headphone jack will mute the speaker.
Q: My Line 6 amp headphone jack is also labeled direct/recording output. Can I use the speaker and the headphone jack at the same time?
A: There is no way to have both the speaker and headphone jack/DI output active at the same time.
[ 本帖最后由 bluesheart 于 2012-5-25 11:07 编辑 ] |
|