|
|
收集的一些吉他琴颈数据
Thin C .79 to .89
Med C .83 to .92
59 LP .87 to .97
Chunkey C .90 to .90
C .90 to .99
Fat C 1.0 to 1.0
Chunkey U .90 to .90
Boat V .95 to .95
Claptin V .84 to .90
V to C .88 to .95
Srv/Ays .84 to .97
Thin D .75 to .81
Fat D .90 to 1.0
1994 Telecaster Special
1 piece maple
9.5" radius
21 frets (0.039" x 0.099")
depth at 1st fret: 0.805"
depth at 12th fret: 0.824"
width at nut: 1.631"
2008 MIM Standard
rosewood board
9.5" radius
21 frets (0.042" x 0.099")
depth at 1st fret: 0.842"
depth at 12th fret: 0.860"
width at nut: 1.641"
2006ish WD Music
capped maple board
12" radius
22 frets (0.042" x 0.105")
depth at 1st fret: 0.791"
depth at 12th fret: 0.859"
width at nut: 1.630"
? Warmoth '59 Roundback
thick slab style rosewood board
10"-16" radius
22 frets (0.0573" x 0.118" - Warmoth's 6100)
depth at 1st fret: 0.872"
depth at 12th fret: 0.972"
width at nut: 1.619"
notes: yes, the nut is actually that narrow - I measured 3 times
1994 JD Tele
1 piece maple
7.25" radius
21 frets (0.033" x 0.077")
depth at 1st fret: 0.910"
depth at 12th fret: 0.965"
width at nut: 1.652"
notes: soft V profile that's somewhat 'hard' at the nut and flattens out towardthe heel
'03 AST:
Width at nut 1.687"
1st fret - .824"
12th fret - .858"
Frets - .105" x ~.040" (but I've leveled them once.) o.k. just for reference purposes
my favorite neck happens to be an ebay special
cij strat soft v
all maple
21 frets (.080 x .040)
nut width 1.665
1st fret .940
12th fret 1.000
Tele Neck TMSF-S
Radiused nut slot
1st = .820 12th = .930
1 5/8 nut width
7.25 to 9.5 compound radius
Telecaster modelswith "U" shaped necks:
(7.25” radius = 184mm, 9.5” radius = 241 mm)
American Vintage '52 Reissue:
1-Piece Maple, “U” Shape, (Nitrocellulose Lacquer Finish), 7.25" radius
G. E. Smith:
1-Piece Maple, Extra Deep "U" Shape, (Nitrocellulose Lacquer Finish),7.25” Radius
American Deluxe Ash Telecaster:
Maple, “U” Shape, (Satin Urethane Finish), 9.5” Radius
James Burton Standard:
1-Piece Maple, ‘60’s “U” Shape, (Satin Urethane Finish), 9.5" radius
‘69 Telecaster® Thinline:
(Gloss Urethane Finish), “U” Shape, 7.25” Radius
Vintage Hot Rod '52:
1-Piece Maple, “U” Shape, (Gloss Nitrocellulose Lacquer Finish with SatinBack), 9.5" radius
Danny Gatton:
Maple, Custom '50's "U" Shape, (Polyurethane Finish), 9.5"Radius
Models that were incorrectly referenced as having a "U" shape neck:
The '72 Custom Re-issue:
“C” Shape, (Gloss Urethane Finish), 7.25" radius
Classic Player Baja Telecaster®
Soft “V” Shape, (Gloss Urethane Finish), 9.5” radius
Road Worn™ ‘50s Telecaster®
“C” Shape, (Urethane Finish), 7.25” Radius (184 mm)
Muddy Waters Telecaster® “C” Shape, (Satin Urethane Finish), 9.5” Radius
Telecaster models with "U" shapednecks:
(7.25” radius = 184mm, 9.5” radius = 241 mm)
Nocaster:
Maple, “U” Shape, (Nitrocellulose Lacquer Finish), 7.25” Radius
American Vintage '52 Reissue:
1-Piece Maple, “U” Shape, (Nitrocellulose Lacquer Finish), 7.25" radius
G. E. Smith:
1-Piece Maple, Extra Deep "U" Shape, (Nitrocellulose Lacquer Finish),7.25” Radius
American Deluxe Ash Telecaster:
Maple, “U” Shape, (Satin Urethane Finish), 9.5” Radius
James Burton Standard:
1-Piece Maple, ‘60’s “U” Shape, (Satin Urethane Finish), 9.5" radius
‘69 Telecaster® Thinline:
(Gloss Urethane Finish), “U” Shape, 7.25” Radius
Vintage Hot Rod '52:
1-Piece Maple, “U” Shape, (Gloss Nitrocellulose Lacquer Finish with Satin Back),9.5" radius
Danny Gatton:
Maple, Custom '50's "U" Shape, (Polyurethane Finish), 9.5"Radius
Models that were incorrectly referenced as having a "U" shape neck:
The '72 Custom Re-issue:
“C” Shape, (Gloss Urethane Finish), 7.25" radius
Classic Player Baja Telecaster
Soft “V” Shape, (Gloss Urethane Finish), 9.5” radius
Road Worn™ ‘50s Telecaster
“C” Shape, (Urethane Finish), 7.25” Radius (184 mm)
Muddy Waters Telecaster
“C” Shape, (Satin Urethane Finish), 9.5” Radius |
|
发表于 2012-8-16 21:35:38
