|
|
发表于 2014-6-20 10:23:40
|
显示全部楼层
F 的去官網全有標明，
warmoth用的油漆 ： Urethane is our primary finishing material though we do use several thin coats of polyester as a base coat to fill the wood grain. The process is first to fill the grain, then the color coat is applied. Finally the top coats are laid down before final sanding and buffing. If the body is dyed, these colors are put on the raw wood prior to the base coat application. There seems to be much controversy about finishing materials and poly seems much maligned...Without sinking into the depths of this debate, let us just say that our finishes seldom exceed twelve thousandths on an inch in thickness. For the lacquer fans, there are others that spray this material though the cost is generally at least double for a very questionable sonic difference.
底漆是polyester 主要是填平木紋的，他們聲稱做漆比其他廠薄，可能是這樣，表面的Urethane 比較脆，被硬的東西磕碰了，表面會裂，而非凹。 |
|
