买琴买鼓,就找魔菇!

 找回密码
 注册
搜索
查看: 4596|回复: 9

[电吉他硬件] 关于 prs 琴颈的问题

[复制链接]
发表于 2016-10-26 13:01:20 | 显示全部楼层 |阅读模式
吉他中国微信公众号
手里现在只有一把 epi lp std ,感觉琴颈有些厚,站撸比较费力。现在有意买把prs 的custom或者se std,不知道这两把琴颈手感属于哪种,对比epi lp std 呢
发表于 2016-10-26 16:53:54 | 显示全部楼层
吉他中国抖音
手感像Fender C。。。PRS有三种琴颈,我说的是regular...
发表于 2016-10-26 19:13:54 | 显示全部楼层
GC视频号
se的基本都是扁薄。
发表于 2016-10-26 19:36:43 | 显示全部楼层
买琴买鼓,就找魔菇
81816281 发表于 2016-10-26 19:13
se的基本都是扁薄。

像Fender C , 实际是最常用的。不叫 扁薄

ibz 的那些平扁的才叫扁薄
发表于 2016-10-26 20:23:40 | 显示全部楼层
我记得EPI LP STD的琴颈是D型的,我这有个PRS SE的LP琴颈是C型的
发表于 2016-10-26 20:26:58 | 显示全部楼层
本帖最后由 星火吉他 于 2016-10-26 20:30 编辑

只用得惯IBANEZ 顶级的17mm琴颈,其他的都觉得太厚了,RG2550的18mm琴颈就没法用,太厚了
至于fender,gibson,无法理解
发表于 2016-10-26 20:57:47 | 显示全部楼层
星火吉他 发表于 2016-10-26 20:26
只用得惯IBANEZ 顶级的17mm琴颈,其他的都觉得太厚了,RG2550的18mm琴颈就没法用,太厚了
至于fender,gibs ...

你有没有考虑过是因为手太小?
发表于 2016-10-26 22:29:53 | 显示全部楼层
Hendrix-HK 发表于 2016-10-26 19:36
像Fender C , 实际是最常用的。不叫 扁薄

ibz 的那些平扁的才叫扁薄

差太远了吧,fender嘅圆厚好多。prs se嘅,我摸过两把,感觉都系同一般那差唔多嘅手感,就系相对圆小小。不过非se型号就唔知道
发表于 2016-10-26 22:58:21 | 显示全部楼层
81816281 发表于 2016-10-26 22:29
差太远了吧,fender嘅圆厚好多。prs se嘅,我摸过两把,感觉都系同一般那差唔多嘅手感,就系相对圆小小。 ...

PRS Neck info

PATTERN NECK SHAPES – CURRENT

The new “Pattern” neck is an updated Wide Fat PRS neck style based on Paul’s pre-factory design. These necks were found on the instruments built for Carlos Santana, Peter Frampton and Howard Leese from the late 70’s to the mid 80’s.

WIDTH OF THE FRETBOARD AT THE NUT:

    Pattern, Wide Fat – 1 11/16″
    Pattern Thin, Wide Thin – 1 11/16″
    Pattern Regular, Regular – 1 21/32″
    12 String – 1 47/64″

WIDTH AT THE BODY

    Pattern, Wide Fat – 2 1/4″
    Pattern Thin, Wide Thin – 2 1/4″
    Pattern Regular, Regular – 2 1/4″
    12 String – 2 19/64″

NECK DEPTH AT THE NUT

    Pattern, Wide Fat – 27/32″
    Pattern Thin, Wide Thin – 25/32″

FENDER  现代 C = 0.800" = 25.6/32" = 在这两者之间。
    Pattern Regular, Regular – 27/32″

    12 String – 27/32″

FINGERBOARD RADIUS

    10″ on all guitars except when otherwise stated
    11 1/2″ on the Santana models and 12 strings

SCALE LENGTH

    25″ on most models except when otherwise specified
    24 1/2″ on the SC 58, Santana, Starla, Starla X, Mira X and 245 models
    25 1/4″ on 513, DC3, and NF3
    25 1/2″ on 305

FORMER NECK SHAPES

The Regular (sometimes called Standard) neck is a round neck shape that is 1/32 narrower and not quite as thick front to back as our Wide Fat neck.

The Wide Fat neck has the same nut width as the Wide Thin neck, but it has a deeper profile. Because of its strength and longer “heel”, the Wide Fat neck produces warm tones with lots of sustain.

The Wide Thin neck has a thinner profile front to back than the Wide Fat. It is a favorite of fast players and lead guitar players.

Width of the fingerboard at the nut:

    Regular – 1 21/32”
    Wide Fat and Wide Thin – 1 11/16”
    Santana – 1 21/32”
    Custom 22/12 – 1 47/64″
    513 – 1 43/64″
    Hiland – 1 21/32″
    Grissom and Al D – 1 21/32″
    Acoustics – Wide – 1 3/4″, Standard – 1 11/16″

Width at the body:

    Regular – 2 1/4”
    Wide Fat and Wide Thin – 2 1/4″
    Santana – 2 1/4”
    Custom 22/12 – 2 19/64″
    513 – 2 3/16″
    Hiland – 2 7/32″
    Grissom and Al D – 2 1/4″
    Acoustics – Wide – 2 1/4″, Standard – 2 1/8″

Depth of neck at the nut:

    Regular and Wide Fat – 27/32”
    Wide Thin – 25/32”
    513 – 55/64″
    Hiland – 25/32″
    Grissom And Al D 27/32″
    Acoustics – 55/64″

Fingerboard radius:

10” on all guitars and basses except 11 1/2” on the Santana II and Custom 22/12
12″ on Acoustics

Scale length:

    25” on all guitars except
    24 1/2” on the Santana II and III
    25 1/4″ on 513
    25 1/4″ on Acoustics
 楼主| 发表于 2016-11-23 09:27:53 | 显示全部楼层
亲测,prs se standard 琴颈要比epi lp薄,高把位手感更是完虐epi,手小的朋友用prs绝对没错
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|小黑屋|吉他中国官方

GMT+8, 2024-12-13 04:00

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表