|
BOSS的合唱为什么新出的型号就那么差呢?无论是ch1还是ce5
真是黄鼠狼下耗子一代不如一代,原来经典的CE-1 CE2都是传奇。ce3比ce2多了立体声输出, ce3还提供另外的一种双输出,就是带效果的和不带效果的一起出声,很有特色。我这个是绿色贴纸的二代日产,第一代是黑色贴纸的,编号是:812405 ,生产于1987年。最下面一张是我的两个VINTAGE合唱的合影,呵呵。
国外资料:
CE-3 Chorus
This chorus pedal have adjustments for depth and rate and supports in addition a stereo output. Having two outputs gives you the option of having a chorused signal from Output A and the direct signal at the same time from Output B. These can be panned left and right to simulate the sound of two guitars playing simultaneously.
The placement of the 3 knobs are not typical. This is the only 3-knob pedal that has the knobs in a row. As this causes the LED to become hidden behind the middle knob, it was a solution that was soon changed in favor of the normal V shaped 3 knob controls.
There are minor colour versions of this pedal and some versions have white top knobs as well. The knobs was on the later models changed to white top knobs. The CE-3 was the first metallic coloured Boss compact pedal.
Version differences
- The earlier versions had all black knobs. These where later changed to the white top knobs.
Boss Pocket Dictionary vol.3 (1986):
In order to make optimum use of the CE-3, it is important to fully understand how the Stereo Mode control works.
In Mode I, the signal at the A output jack is a combination of the direct signal plus a positive-phase effect signal (direct+effect), while the signal at the B output jack is a combination of the direct signal plus a reverse-polarity effect signal (direct-effect). The two outputs can be further combined and sent separately to two amps in order to create a true, wide stage stereo chorus sound with a lush, swirling and deep effect.
- In Mode II, only the effect signalis sent to the output jack, and the B output jack receives no effect signal at all. This is the same configuration found on the original CE-1 and on Roland's well-known Jazz Chorus Amplifiers.
- When Using the monaural setting, set the Stereo Mode control to Mode I.
Specifications
- Controls: Rate, Depth, 2-way Mode Switch
- Connectors: Input, Output A, Output B, AC Adaptor
- Current Draw: 13 mA (DC 9V)
- Weight: 400g/0.88 lbs.
- Input Impedance: 1Mohm
- Residual Noise Level: -90 dBm (IHF-A)
- Recommended Load Impedance: 10kOhm or greater
- Recommended AC Adaptor: ACA Series
Labels
- Black - Made In Japan
- Green - Made In Japan
- Green - Made In Taiwan
The CE-3 was sold from October 1982 to February 1992.
[ 本帖最后由 蓝调吉他手 于 2008-7-1 21:10 编辑 ] |
|